How to mine Evrmore (EVR)?

Below, we list a few examples to get you mining Evrmore (EVR) with miniZ. 

You should check each pool page since the pool may define more than one server or port number.

Normally, you do not need to write --par=ProgPow, or --pers=EVRMORE-PROGPOW. However, this depends on the pool.

For more information about miniZ command line arguments, please refer to Usage page.
Happy EVR mining!

How to mine Rethereum (RTH)?

Below, we list a few examples to get you mining Rethereum (RTH) with miniZ. 

You should check each pool page since the pool may define more than one server or port number.

Normally, you do not need to write --par=ethashb3, or --pers=reth. However, this depends on the pool.
Also, for most pools the miner will run the correct stratum. If not please leave us a message. For example, the last example in the list shows the need to add ‘stratum1’ to url option. This will not be necessary in the next version.

For more information about miniZ command line arguments, please refer to Usage page.
Happy RTH mining!

How to mine Conflux (CFX)?

Below, we list a few examples to get you mining Conflux (CFX) with miniZ. 

You should check each pool page since the pool may define more than one server or port number.

* * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *

For dual mining CFX+ZIL:

General example is usually of the form:
miniZ.exe --url=Your_CFX_Wallet.Worker_Name@equihash_server_name:port
--url=Your_ZIL_Wallet.Worker_Name@ZIL_server_name:port

Example:

  • CFX+ZIL
    miniZ.exe --url=CFX_Wallet.Worker_Name@pool.woolypooly.com:3094
    --url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra

* * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *

Normally, you do not need to write --par=octopus --pers=cfx. However, this may depend on the pool.

For more information about miniZ command line arguments, please refer to Usage page.
Happy CFX mining!

How to mine Kaspa (KAS)?

Below, we list a few examples to get you mining Kaspa (KAS) with miniZ. 

You should check each pool page since the pool may define more than one server or port number.

* * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *

For dual mining Kaspa+ZIL:

General example is usually of the form:
miniZ.exe --url=Your_KAS_Wallet.Worker_Name@equihash_server_name:port
--url=Your_ZIL_Wallet.Worker_Name@ZIL_server_name:port

Example:

  • KAS+ZIL
    miniZ.exe --url=KAS_Wallet.Worker_Name@eu1.kaspa-pool.org:4444
    --url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra

* * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *

For more information about miniZ command line arguments, please refer to Usage page.
Happy KAS mining!

How to mine Zilliqa (Zil)?

Below, we list a few examples to get you mining Zilliqa (ZIL) with miniZ. 

You should check each pool page since the pool may define more than one server or port number.

  • Rustpool: https://zil.rustpool.xyz/
    ZIL + ETC with eu1-etc.ethermine.org:4444, difficulty=4G:
    miniZ.exe --url=Your_ETC_Wallet.Worker_Name@eu-zil.rustpool.xyz:8008 --pass=Your_ZIL_Wallet@eu1-etc.ethermine.org:4444@4G --log --extra --par=etchash
  • Shardpool: https://shardpool.io/
    ZIL + ETC with proxy enabled to eu1-etc.ethermine.org:4444:
    miniZ.exe --url=Your_ETC_Wallet.Worker_Name@eu1-zil.shardpool.io:3333 --pass=Your_ZIL_Wallet@eu1-etc.ethermine.org:4444 --log --extra --par=etchash

    Alternative way, example with UBQ:
    ZIL + UBQ with Zergpool, reward in LTC:
    miniZ.exe --url=Your_LTC_Wallet.Worker_Name@ubqhash.eu.mine.zergpool.com:9998 -p c=LTC,ID=Worker_Name --url=Your_ZIL_Wallet.Worker_Name@eu1-zil.shardpool.io:3333 --log --extra
  • Crazypool: https://zil.crazypool.org
    miniZ.exe --url=Your_ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra
  • Ezil.me: https://ezil.me/
    ETC + ZIL, SSL port:
    miniZ.exe --url=ssl://Your_ETC_Wallet.Your_ZIL_Wallet.Worker_Name@eu.ezil.me:24443 --log --extra

    

    • 



* * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *


For dual mining Equihash+ ZIL:


* * * We’re trying to make this as compatible as possible with pools.

Pools may also need to make adjustments to accommodate this feature.


* * * CrazyPool seems to work well, follow the examples below.

With ShardPool, it seems that sometimes the workers take some time to appear on pool side. We’ll be checking this.


 * * *  With Nicehash  you need to add zil://

--url=zil://Your_ZIL_Wallet.Worker_Name@daggerhashimoto.auto.nicehash.com:9200


General example is usually of the form:

miniZ.exe --url=Your_Equihash_Wallet.Worker_Name@equihash_server_name:port

--url=Your_ZIL_Wallet.Worker_Name@ZIL_server_name:port 


Examples:


    

  • FLUX+ZIL
    
miniZ.exe --url=FLUX_Wallet.Worker_Name@eu-flux.fluxpools.net:7001
    
    --url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra
    • 

  • BTG+ZIL
    
miniZ.exe --url=BTG_Wallet.Worker_Name@eu1.zhash.pro:5057
    
--url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra
    • 

  • KASPA+ZIL
    
miniZ.exe --url=KASPA_Wallet.Worker_Name@de.kaspa.herominers.com:1206
    
--url=ZIL_Wallet.Worker_Name@eu1-zil.shardpool.io:3333 --log --extra
    • 

  • CFX+ZIL
    
miniZ.exe --url=AION_Wallet.Worker_Name@pool.woolypooly.com:3094
    
--url=ZIL_Wallet.Worker_Name@eu1-zil.shardpool.io:3333 --log --extra
    • 

  • AION+ZIL
    
miniZ.exe --url=AION_Wallet.Worker_Name@cluster.aionpool.tech:3333
    
--url=ZIL_Wallet.Worker_Name@eu1-zil.shardpool.io:3333 --log --extra
    • 

  • YEC+ZIL
    
miniZ.exe --url=YEC_Wallet.Worker_Name@ycash.dapool.io:3344 --log
    
--url=ZIL_Wallet.Worker_Name@eu1-zil.shardpool.io:3333 --log --extra
    • 

  • BTCZ+ZIL
    
miniZ.exe --url=BTCZ_Wallet.Worker_Name@eu2.solopool.org:8001
    
--url=ZIL_Wallet.Worker_Name@eu1-zil.shardpool.io:3333 --log --extra
    • 

  • BEAM+ZIL
    
miniZ.exe --url=BEAM_Wallet.Worker_Name@beam.2miners.com:5252
    
--url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra
    • 

  • CASH+ZIL
    
miniZ.exe --url=CASH_Wallet.Worker_Name@cash.coinmine.pl:2002
    
--url=ZIL_Wallet.Worker_Name@eu.crazypool.org:5005 --log --extra
    • 



* * * Check if the option --autoclocks works for you, it can be very useful for changing OC settings during dual mining. * * *


For more information about miniZ command line arguments, please refer to Usage page.

Happy ZIL mining!


How to mine Gemlink (GLINK)?
Below, we list a few examples to get you mining Gemlink (GLINK) with miniZ. 


You should check each pool page since the pool may define more than one server or port number.


    

  • zhash.pro: https://zpool.ca

    miniZ.exe --url=Your_BTC_Wallet.Worker@equihash144.eu.mine.zpool.ca:2144 -p c=BTC,zap=GLINK --log --extra
    

    • 

  • Zergpool: https://zergpool.com/

    miniZ.exe --url=Your_BTC_Wallet.Worker@equihash144.mine.zergpool.com:2146 -p c=BTC,mc=GLINK --log --extra
    

    • 

  • 2mars.biz: https://gemlink.2mars.biz/

    miniZ.exe --url=YourWallet.Worker@glink.ca.2mars.biz:8888 --log --extra
    

    • 



Normally, you do not need to write --pers sngemPoW or --par=144,5. However, this depends on the pool, and miniZ version.


For more information about miniZ command line arguments, please refer to Usage page.

Happy GLINK mining!


How to mine Firo (FIRO)?
Below, we list a few examples to get you mining Firo (FIRO) with miniZ. 


You should check each pool page since the pool may define more than one server or port number.


    

  • WoolyPooly: https://woolypooly.com/en/coin/firo

    miniZ.exe --url=YourWallet.Worker@pool.eu.woolypooly.com:3104 --log --extra
    

    • 

  • MintPond: https://mintpond.com/#!/firo
    

    

    miniZ.exe --url=YourWallet.Worker@firo.mintpond.com:3000 --log --extra
    

    • 

  • PicoPool: https://firo.picopool.org/

    miniZ.exe --url=YourWallet.Worker@firo-eu1.picopool.org:22222 --log --extra
    

    • 

  • SoloPool: https://firo.solopool.org/
    

    

    miniZ.exe --url=YourWallet.Worker@s3.solopool.org:8014 --log --extra
    

    • 

  • Zergpool.com: http://zergpool.com/
    
To mine FIRO and get paid in FIRO:
    

    miniZ.exe --url=YourWallet.Worker@firopow.eu.mine.zergpool.com:3001 -p c=FIRO,mc=FIRO
    

    To mine FIRO and get paid in BTC:
    

    miniZ.exe --url=Your_BTC_Wallet.Worker@firopow.eu.mine.zergpool.com:3001 -p c=BTC,mc=FIRO

    

    • 

  • 2miners: https://firo.2miners.com/

    miniZ.exe --url=YourWallet.worker@firo.2miners.com:8181--log --extra

To mine with SSL port:
miniZ.exe --url=ssl://YourWallet.worker@firo.2miners.com:18181--log --extra
    

    • 



Normally, you do not need to write --par=progpow --pers=firo. However, this may depend on the pool.


For more information about miniZ command line arguments, please refer to Usage page.

Happy FIRO mining!


How to mine Ethereum Classic (ETC)?
Below, we list a few examples to get you mining Ethereum Classic (ETC) with miniZ. 


NOTE: It is possible that a few pools are not yet supported.

             We’ll work to increase the number of supported pools in the next release.


You should check each pool page since the pool may define more than one server or port number.



Normally, you do not need to write --par=etchash and/or --pers=etchash. However, this depends on the pool. We’ll keep improving the miner in order to support more pools.


For more information about miniZ command line arguments, please refer to Usage page.

Happy ETC mining!


How to mine Ethereum (ETH)?
Below, we list a few examples to get you mining Ethereum (ETH) with miniZ. 


NOTE: It is possible that a few pools are not yet supported.

             We’ll work to increase the number of supported pools in the next release.


You should check each pool page since the pool may define more than one server or port number.



    

  • MiningPoolHub: ethereum.miningpoolhub.com
    

    

    miniZ.exe --url=YourUser.Worker@us-east.ethash-hub.miningpoolhub.com:20535 --log --extra
    

    • 

  • Nanopool: eth.nanopool.org

    miniZ.exe --url=YourWallet.Worker@eth-eu1.nanopool.org:9999 --log --extra
    

    Example mining to SSL port:
    

    miniZ.exe --url=ssl://YourWallet.Worker@eth-eu1.nanopool.org:9433 --log --extra
    

    • 

  • F2Pool: https://www.f2pool.com/

    miniZ.exe --url=YourWallet.Worker@eth-eu.f2pool.com:6688 --log --extra
    

    • 

  • PandaVedio: http://poolgpu.pandavedio.com
    

    

    miniZ.exe --url=YourWallet.Worker@pool.xt.ink:8008 --log --extra --par=ethash
    

    • 

  • Minerall: minerall.io/ethereum
    

    

    miniZ.exe --url=YourWallet.Worker@pool.minerall.io:3401 --log --extra
    

    • 

  • 2miners: eth.2miners.com
    

    

    miniZ.exe --url=YourWallet.worker@eth.2miners.com:2020 --log --extra
    

    • 

  • Ethermine: ethermine.org

    miniZ.exe --url=YourWallet.Worker@eu1.ethermine.org:4444 --log --extra
    

    • 

  • HiveonPool: hiveon.net

    miniZ.exe --url=YourWallet.Worker@eu-eth.hiveon.net:4444 --log --extra
    

    • 

  • AntPool: v3.antpool.com

    miniZ.exe --url=YourWallet.Worker@stratum-eth.antpool.com:8008 --log --extra
    

    • 

  • Flexpool: flexpool.io

    miniZ.exe --url=YourWallet.Worker@eth-de.flexpool.io:4444 --log --extra
    

    • 

  • SoloPool: eth.solopool.org

    miniZ.exe --url=YourWallet.Worker@s1.solopool.org:8002 --log --extra
    

    • 

  • NiceHash: www.nicehash.com

    miniZ.exe --url=YourBTCWallet.Worker@daggerhashimoto.eu.nicehash.com:3353 --log --extra
    

    • 



Normally, you do not need to write --par=ethash. However, this depends on the pool.


For more information about miniZ command line arguments, please refer to Usage page.

Happy ETH mining!


How to mine Ravencoin (RVN)?
Below, we list a few examples to get you mining Ravencoin (RVN) with miniZ. 


You should check each pool page since the pool may define more than one server or port number.


    

  • Suprnova: https://rvn.suprnova.cc/
    

    

    miniZ.exe --url=YourUser.Worker@rvn.suprnova.cc:8888 --log --extra
    

    • 

  • K1Pool: https://k1pool.com/pool/rvn
    

    

    miniZ.exe --url=YourWallet.Worker@eu.rvn.k1pool.com:7861 --log --extra
    

    • 

  • WoolyPooly: https://woolypooly.com/#/coin/rvn
    

    

    miniZ.exe --url=YourWallet.Worker@rvn.woolypooly.com:55555 --log --extra
    

    • 

  • MintPond: https://mintpond.com/#!/ravencoin
    

    

    miniZ.exe --url=YourWallet.Worker@ravencoin-eu.mintpond.com:3010 --log --extra
    

    • 

  • Zergpool.com: http://zergpool.com/
    
To mine RVN and get paid in RVN:
    

    miniZ.exe --url=YourWallet.Worker@kawpow.eu.mine.zergpool.com:3638 -p c=RVN,mc=RVN
    

    To mine RVN and get paid in BTC:
    

    miniZ.exe --url=Your_BTC_Wallet.Worker@kawpow.eu.mine.zergpool.com:3638 -p c=BTC,mc=RVN
    

    • 



    

  • Blocksmith: https://rvn.bsmith.io/

    miniZ.exe --url=YourWallet.Worker@eu.stratum.rvn.bsmith.io:5555 --log --extra
    

    • 




Normally, you do not need to write --par=kawpow or --pers=rAVENCOINKAWPOW. However, this depends on the pool.


For more information about miniZ command line arguments, please refer to Usage page.

Happy RVN mining!